Keyboard screen does not switch on

Keyboard screen does not switch on

Cause: Power is not turned on


Solution:   
1.Check to see if the Power Supply is ON and running
2.Check to see if the fourth LED on the Power Supply is ON
3.Check connection from the keyboard to Power Supply

Instructions:





    Submit a ticket


      Remote Support








        • Related Articles

        • Slowness in VR-800 interface/keyboard reaction

          Cause: Sometimes the unit will time out if the internet is lost and takes a while to come back Solution: Reboot VR-800 Instructions: 1.Check the % on the top left corner If less on 40% 2.Hold the 2  button down on the keyboard until the unit turns ...

        • VisionR/S Series - Best Practices to clean keyboard

          Switch the device OFF every evening by holding the upper leftmost button down for several seconds. Switch ON every morning by briefly pressing the upper leftmost button.  Clean the Touch screen every evening with a soft microfiber cloth.

        • Cleaning Keyboard - VisionR 800

          STEP 1 Switch off the console STEP 2 Remove fingerprints smudges with a damp cloth or neutral cleanser, once a day. It is better no to use a spray cleaner to avoid getting liquid in between the buttons. Avoid using organic solvent, such as paint ...

        • VisionR/S Series - Touch Screen

          Locate each section and working areas .              

        • VISIONR 700/800 - Reboot: System Halted

          Problem cause:  VISIONR700/800 was turned off the wrong way. Following message displayed : [125.8016531 reboot : system halted] Could be normal depending of the configuration of the power supply  It indicates that the power supply is set-up in B ...

        • Recent Articles

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • What are the benefits of LM LLT?

          It is fast—a treatment lasts 15 minutes. It is painless. It grants immediate relief to the patient. It is easy and safe for the operator. It is plug-and-play and does not require the operator to be constantly present during the treatment.