E-Tess TOUCH SCREEN CALIBRATION
In case of unresponsiveness or unprecise touch commands, is recommended to calibrate the touch screen following the steps below:
1. At the upper bar, press the setup button to access the configuration/maintenance menu.
2. Select the "Touch screen calibration" function .
3. Four crosses will successively appear at the four corners of the screen. Click at the centre of each
cross when they appear on screen.
Once this operation has been carried out, you get back to the general configuration menu.
Submit a ticket
Remote Support
Related Articles
Table cutout scheme - Pro-E and Mr. Series
Cutout scheme to prepare the workbench for the Edgers M40 (Pro Series), M24 and M22 (Mr. Series)PRO-E USER MANUAL
Error Codes_B21-B41_L11-L12-L13-L14-L20_M22-M24-M25
Opt 1 Please contact your technician with the product data. Opt 1000 Opt 1001 Internal error. Please contact your support technician.+48 Opt 1002 Unforeseen error. Please contact your support technician. Opt 1003 No internal memory. Please contact ...Spindles Replacement Tutorial
Introduction: This article provides information on how to change the spindles of the Mr. Blue, Mr. Orange and Pro-E lens finishing systems. The need of replacement is indicated automatically by the machine when replacement is necessary. The indicator ...Adjust the position of the bevel and groove
After beveling a lens, if the position of the bevel or groove appears to be systematically too forward or backwards, you can adjust it. To access this menu on the beveling machine's work screen, select: The following screen is displayed: 1 - Bevel ...
Recent Articles
How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.What are the benefits of LM LLT?
It is fast—a treatment lasts 15 minutes. It is painless. It grants immediate relief to the patient. It is easy and safe for the operator. It is plug-and-play and does not require the operator to be constantly present during the treatment.