CP 550 - FAQ

CP 550 - FAQ

ISSUE

CAUSE

SOLUTION

Customer complaints about calibration.

The projector is not at a correct distance

Make sure the projector is a between range 2m to 7m


The lamp does not light up when the main switch (7) is turned on.  

Poor connection of the power supply cable

Place the switch on the "0" position and then firmly plug in the power supply cable (8).

The fuse has blown.  

Replace the fuses (see 5.3 – Replacing a fuse).


Imbalanced brightness within the field of vision.  

The optical part or test is dirty.  

Clean the optical part or test (see 5.1 – Handling the device)  

incorrect sitting of the LED position :

Adjust the position of the LED using a screwdriver

The projector does not react when pressing on the remote control buttons.


Depleted batteries  

Replace the batteries (see 5.4 – Replacing the batteries).






    Submit a ticket


      Remote Support








        • Related Articles

        • CS550 - FAQ

          Question Answer What is the size of screen CS550? 19" WITHOUT POLARIZATION function Can I do glare test? No, glare test is not possible. What is the min-max length for my exam room? recommend min 10ft - max 18 (21' for cpola600) Can I show - upload ...

        • CSPOLA600 - FAQ

          Question Answer What is the size of screen CSPOLA600? 24" POLARIZATION function Can I do glare test? No, glare test is not possible. What is the min-max length for my exam room? recommend min 10ft - max 18 (21' for cpola600) Can I show - upload ...

        • CP550 - User Manual

        • Recent Articles

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • How to remove the IPL cartridges?

          To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.

        • What are the benefits of LM LLT?

          It is fast—a treatment lasts 15 minutes. It is painless. It grants immediate relief to the patient. It is easy and safe for the operator. It is plug-and-play and does not require the operator to be constantly present during the treatment.