How to carry out the autotests on Essilor edgers
To test the proper performance of the edger, select
from your work screen.
1. Edger autotests
2. Initialisation and rotation of lens shafts
3. Reproducer: lens shaft raising and lowering
4. Right feeler movement
5. Left feeler movement
6. Closing of lens shafts
7. Wheel rotation
8. Rotation of Grooving/Milling/Drilling (GMD) module
9. Movement of Grooving/Milling/Drilling (GMD) module
10. Transfer initialization
11. Door
12. Water test
◦ trough spraying
◦ door spraying
1. Select the autotest to be carried out.
2. Press
to start the test cycle.
You can press
to stop the cycle at any moment.
> The result is displayed on the right of the icon of the autotest carried out:
◦
The equipment is operational.
◦
A malfunction has been detected; a description is displayed in the message box on the right.
Submit a ticket
Remote Support
Related Articles
Table cutout scheme - Pro-E and Mr. Series
Cutout scheme to prepare the workbench for the Edgers M40 (Pro Series), M24 and M22 (Mr. Series)Grooving position adjustment
This article is applicable for Delta, Jess D, Jess and Jessie Checking the grooving position - Place a lens on the machine. - Cut a grooved square K39 barcode in manual mode at 50% - Do not perform the test on glass (mineral). - It should be in the ...
Recent Articles
How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.How to remove the IPL cartridges?
To remove any of the terminals, hold the hand piece with both hands. Place the thumb under the terminal and push up to disengage. Use your other hand to slide the terminal out.What are the benefits of LM LLT?
It is fast—a treatment lasts 15 minutes. It is painless. It grants immediate relief to the patient. It is easy and safe for the operator. It is plug-and-play and does not require the operator to be constantly present during the treatment.